Electric control series of motor

Body series

Electric hydraulic power steering system control unit

Electric hydraulic power steering system control unit

Electric hydraulic power steering system control unit

Application scenario: 1. The belt pulley drive of the traditional hydraulic power steering system is replaced by the oil pump motor drive. 2. Work according to actual needs, which can improve fuel efficiency and reduce carbon dioxide emissions by about 3%. 3. It can achieve the fuel economy of electric power steering system, but the system change cost is lower.

View details

Electronic oil pump control unit

Electronic oil pump control unit

Electronic oil pump control unit

Application scenario: 1. The belt pulley drive of the traditional hydraulic system is replaced by the oil pump motor drive. 2. Provide hydraulic oil to control all clutches and brakes to achieve gear shifting, and ensure that the connecting elements can stably transmit torque without slipping. 3. Provide enough lubricating oil to cool the automatic transmission.

View details

Electronic water pump control unit

Electronic water pump control unit

Electronic water pump control unit

Application scenario: 1. The working condition of the water pump can be adjusted at will. It can not only help to raise the temperature rapidly during cold start, but also reduce energy consumption. It can also work under full load when heat is dissipated with high power, and is not controlled by the engine speed, so the water temperature can be well controlled. 2. After the engine is turned off, the warm air can still be used. There is also an extended parking warm air function. After the engine is turned off, it will automatically run for a period of time to dissipate heat for the turbine.

View details

Electric park execution module

Electric park execution module

Electric park execution module

Application scenario: 1. The motor drives the parking locking mechanism to lock the output shaft of the reducer. A pawl is set inside the gearbox to lock the gear on the output shaft to form a mechanical lock, so that the drive axle can be clamped to fix the vehicle. 2. Legal safety requirements to achieve intelligent control of gear P and improve vehicle safety performance.

View details

Electronic shift actuator module

Electronic shift actuator module

Electronic shift actuator module

Application scenario: 1. The module integrates motor and its controller, gear reducer and output angle sensor. According to the vehicle shift command, the controller drives the motor to drive the shift fork to perform the shift action after decelerating through the reducer, so as to realize the electronic shift function. 2. Two gear switching with different reduction ratios can achieve higher efficiency of the drive motor in the full speed range and improve the endurance of the electric vehicle.

View details

Gas booster pump

Gas booster pump

Gas booster pump

Application scenario: 1. The low-pressure pump is used to replace the conventional wound self pressurization system, reducing the leakage risk of the gas supply system caused by multiple welding points of the wound self pressurization system. 2. The gas pump can quickly pressurize the gas cylinder and provide sufficient power for the whole vehicle. 3. The speed is up to 5.5Wrpm, which can boost the pressure rapidly.

View details

< 1 >

copyright © Shenzhen Nanfang Del Automotive Electronics Co., Ltd

SEO

Powered by: CEglobal